The Internal Cutting Tool is designed to perform internal cuts in various dimensions. It will be standard tooling and the same operational methodology which has been developed over the last 20 years will be applied for the severance of the piles.

There is a dual nozzle configuration that is hydraulic spring-loaded providing a constant stand-off distance to the leg provided by a cam that will follow the surface. Two cameras are situated close to the nozzle for monitoring. Two proximity switches system are installed close to the nozzle for precise orientation feedback.

The tool has centralizing pins to hold it steady during the cutting operation. The tool will hang off from a spreader beam that will include the capability to fine adjust the height of the tool inside the pile.

The Scanmachine subsea excavator transfers proven land-based technology to the seafloor.

Each of our machines are advanced construction excavators that have, through the addition of specialised control systems, been converted into cutting-edge ROVs. The machines, which vary in size but share the same effective functionality, are tailored to perform based on individual client scope, offering flexibility, power and precision operations.

Scanmachines set new standards in subsea excavation, providing :

The ability to work in strong currents due to unbeatable seabed stability.
The ability to work in harsh weather
+++

Highly controlled operations through use of (3D-monitoring system), which also allows for increased operation in low visibility conditions.

Scanmudring has the technical leading abrasive cutting equipment on the market. The system is a dual-bottle design capable of continously cutting during operation, high-precision cutting manipulators and a cut verification system. Internal cutters available up to 100in or larger on request.

HydraWell are the inventors of PWC® (perf, wash and cement) and owns several patents regarding this technology. The PWC® method replaces section milling for annulus remediation in several well abandonment applications including, but not limited to;
P&A, Slot Recovery, Casing Shoe Repair, Annulus Pressure Remediation

The method is run as a 1-trip system where a perf device (high shot density TCP guns) is run below the PWC® assembly to the planned plug depth. Guns are fired to create access to annulus for the washing operation to commence. Fresh wash fluid is jetted into the annulus before the subsequent cement job is done, leaving a uniform 360-deg cement plug in the area.

This operation reduces the time to remediate a wellbore from 5-15 days with section milling down to 2 days with PWC®.

Some times the operator want to test the integrity of the annulus as part of a P&A or slot recovery programme.

HydraWell have the solution called Annular Integrity Testing (AIT); A dual swab cup assy w/ TCP guns is RIH. At the depth where the formation is believed to be squeezing against the casing, the guns are fired–typically 100ft apart–and the AIT tool is positioned to straddle lower sets of perfs. Fluid is then pumped into the annulus, and if the formation is holding, no return is seen on surface. The tool can then be disconnected and a balanced cement plug set on top to finalise the barrier.

Conventional methods consist of several runs to set bridge plugs and retriveable packers to perform testing. HydraWell´s AIT solution is a 1-trip system and can be done in less than one day.

IKM Ocean Design provides personnel and services with experience from planning and execution of decommissioning projects. Typical services include:

-Planning Phase
Decom plan
Development of Basis of Design
Definition of Decom SoW
Preparation of Input to ITT for Decom SoW
Tender Evaluation & Third-party Quality Assurance
Develop Proximity Agreements
Input to applications to Government bodies
Input and assistance for Peer Review DG2 & DG3

- Execution Phase
Planning of Marine operations
Planning of SIMOPS
HAZID, HAZOP, CARA & QC
Liaison between parties/licenses
Follow-up of Marine Contractor
Follow-up of Disposal Contractor
Verification & QC of Contractor
Offshore representatives on behalf of Client
Follow-up of dismantling and recycling/disposal activity

-Third party verification services

IKM Ocean Design provides personnel and services with experience from planning and execution of cessation projects. Typical services include:

Cessation:
- Residual lifetime assessment and GAP analysis
- Asset Inventory
~Review of existing documentation / Data gathering
~Identify system components and SRI with technical descriptions
~Develop up-to-date system schematics
~Define decommissioning requirements
~Identify cleaning and environmental requirements
- Cessation Planning
~Strategy
~Schedule
~Cost
~Environmental Assessments
- Verification of compliance to rules and regulations
- Liaison between parties/licenses

Frontica Engineering are specialized in topside design and arrangements for all drilling related areas and systems. We have been a reliable concept and design partner to leading shipyards, drilling contractors and oil companies worldwide and have
extensive experience in greenfield and brownfield projects in all phases.

Our services include feasibility studies, Front End Engineering Design (FEED), detail engineering and site support. We have extensive experience in Engineering, Procurement, and Construction (EPC). Additionally, we deliver fully documented design solutions including 3D models.

We have delivered a modular P&A rig as EPC project within 11 months fast track delivery together with MHWirth.

OTS offers complete solutions for handling the waste from P&A operations, our large modern equipment fleet including services is ready to handle your waste materials in a safe and cost effective process.